Trouble Shooting

If you not seeing any data on the console:

  1. Please step through the installation instructions if you have not already.
  2. Take the cover off and make sure the device is turned on. 
  3. Try resetting the device by taking the cover off and pressing the small reset button next to the power-on header. If the device does not blink green when you press the reset button then contact us. 
  4. Make sure the device is in a covered network area. There should be an online hotspot within 0.3 miles of you. You can look at hotspot locations on Helium Explorer.

 

If the data you see on the console is inaccurate:

  1. Make sure the sensor is wired correctly or strapped tightly to your water meter.
  2. Try adjusting where the sensor is on the water meter. 
  3. Try resetting the device by taking the cover off and pressing the reset button or powering it off then on with the header pin.
  4. In some cases faulty electrical wiring in the house can effect readings. If you believe this is the case please contact us. 

Please contact us if you have not solved your problems, we're happy to help! 

Contact@nowisensors.com